CAN, I/O and BLE hardware

Advanced Trackers

Advanced trackers are selected when the project needs richer vehicle data and flexible installation options. They can support connected fleet workflows from location tracking to CAN/FMS values, driver identification and sensor-based automation.

Discuss hardware Hardware

Hardware fit

Professional tracker family for vehicles that need CAN data, I/O, BLE accessories, driver identity, geofences and remote configuration.

LX41-EA, LX43-EA and LX45-EA models
StCAN 2G, XtCAN 2G and XtCAN XG3792M05 options
CAN-capable variants for vehicle data
Programmable I/O for sensors and accessories
Remote configuration and fleet-ready event logic

Device details

Models, notes and specification checks

These details come from the BCE Telematics hardware catalogue and are reviewed again before installation or ordering.

Device

LX41-EA

Compact LX-series tracker for LTE connectivity and basic I/O.

Connector: 4 pins
Cellular: 4G LTE Cat 1 bis with 2G fallback
Positioning: GPS L1, GLONASS L1, Galileo E1, QZSS L1
Bluetooth: Bluetooth 5.4 LE
Digital inputs: 1x
Digital outputs: 1x

Device

LX43-EA

LX-series tracker with expanded connector and wired interfaces.

Connector: 16 pins
Cellular: 4G LTE Cat 1 bis with 2G fallback
Positioning: GPS L1, GLONASS L1, Galileo E1, QZSS L1
Bluetooth: Bluetooth 5.4 LE
RS232 / RS485 / 1-Wire: 1x / 1x / 1x
Digital inputs / outputs: 4x / 4x
Analog inputs: 3x

Device

LX45-EA

Advanced LX-series tracker for CAN-capable vehicle data projects.

Connector: 16 pins
Cellular: 4G LTE Cat 1 bis with 2G fallback
CAN ports: 2x
RS232 / RS485 / 1-Wire: 1x / 1x / 1x
Digital inputs / outputs / analog inputs: 4x / 2x / 3x

Device

CAN 2G Tracker Options

Advanced 2G tracker options for projects where those models are required.

Models: StCAN 2G, XtCAN 2G, XtCAN XG3792M05
Connectivity: 2G
Project fit: Advanced tracker options for CAN-oriented or existing 2G fleet projects
Final check: Exact model datasheet, harness and regional network availability confirmed before order

LX-series common specifications

Dimensions 91 mm W x 20 mm H x 68 mm D

Weight 64 g

Housing material PC, UL94 V-0

Seal IP67 with optional case

Input voltage 12V/24V DC nominal, 9-36V DC range

Optional battery 210 mAh or 850 mAh lithium-ion

Operating temperature With internal battery: -20 C to +60 C; without internal battery: -40 C to +85 C

SIM card 4FF slot

GNSS accuracy 2.5 m CEP50

Sensors 3-axis accelerometer

Certification CE, RoHS

LX-series I/O options

LX41-EA 4 pins; 1x digital input; 1x digital output

LX43-EA 16 pins; 1x RS232; 1x RS485; 1x 1-Wire; 4x digital inputs; 4x digital outputs; 3x analog inputs

LX45-EA 16 pins; 2x CAN; 1x RS232; 1x RS485; 1x 1-Wire; 4x digital inputs; 2x digital outputs; 3x analog inputs

Project check

Hardware is selected after the vehicle, network and workflow are known.

Final model choice depends on region, mobile network availability, vehicle type, harness, sensors, camera positions and installation requirements.

CompatibilityTracker, accessory, sensor and platform logic are checked together.

InstallationPower, mounting, wiring and signal quality are reviewed before rollout.

Data validationLocation, ignition, sensor, CAN and event values are checked after first data arrives.